Guide · Farmers · 3 min read · Updated 17 November 2026
Moving a Combine Harvester by Road: UK Rules and Options
Short answer
A combine harvester can be driven on UK roads within the agricultural vehicle rules or carried on a low loader. Driving suits short hops between fields. For longer moves, sales and purchases, a low loader is safer and faster. Machines wider than normal limits need advance notice under the Special Types Order, and the header travels separately. Low loader haulage starts from £1,000.
Your two options: drive it or haul it
Farmers drive combines between fields and neighbouring farms every harvest, and that is legal within the rules for agricultural vehicles on the road. It becomes impractical over distance. A combine travels slowly, blocks narrow lanes and puts wear on tyres and the drive system that it was never designed to absorb over long road runs.
Low loader haulage takes the machine off the road surface entirely. It is the normal method for dealer deliveries, auction purchases, contractor moves between regions and anything heading to a port. The trade-off is cost and planning time, because a combine on a trailer is a wide, high, heavy load.
| Factor | Driving the combine | Low loader haulage |
|---|---|---|
| Best for | Short moves between nearby fields | Sales, purchases and long distances |
| Speed | Slow, holds up traffic | Normal lorry speeds on suitable roads |
| Wear on machine | Tyres and drive system | None |
| Planning | Route and lighting checks | Route survey, notices, escort if needed |
| Guide cost | Fuel and operator time | from £1,000 |
Wide-load rules for hauling a combine
Most modern combines are wider than the normal vehicle width limit even with the header removed, and the trailer adds height. Loads that exceed standard dimensions are moved under the Road Vehicles (Authorisation of Special Types) (General) Order 2003. Depending on width, weight and length, that means giving advance notice to the police and to the highway and bridge authorities on the route, fitting side and end markers, and using attendants or escort vehicles for the widest loads.
The haulier is responsible for these notices, not the farmer. A competent haulier builds the notice period into the booking, which is one reason combine moves need more lead time than a tractor.
Height, bridges and route planning
Height catches people out more than width. A combine with its unloading auger folded and grain tank extensions lowered can still sit close to four metres on a low loader. Railway bridges on rural roads, low cables at farm entrances and overhanging trees on lanes all need checking before the move.
We plan the route from the farm gate to the destination yard, checking known low bridges, weight-restricted crossings and pinch points. Sometimes the shortest road is not usable and the low loader takes a longer route on bigger roads.
- Fold the unloading auger and lower any tank extensions
- Remove or fold mirrors, beacons and aerials that add height or width
- Check overhead cables and trees at the farm entrance
- Agree a loading point on firm, level ground
- Have the straw chopper and spreader secured for travel
Moving the header
Headers are carried separately. Most farms use a header trolley towed behind a tractor or pickup for short distances. For haulage, the header goes on its own flatbed or, if space allows, on the same low loader in front of the combine. Wide headers of nine metres and more are abnormal loads in their own right.
Tell us the header width and whether you have a trolley. If the trolley goes with the combine, it can sometimes be loaded on the same vehicle, saving a second trip.
What happens on the day
The low loader arrives at the agreed time. The driver checks the ground, lowers the ramps or detaches the neck on a detachable gooseneck trailer, and the combine is driven on by the owner or the driver. It is then chained down at the axles and frame, never through hydraulic pipes or the header mounting. Loading usually takes 45 minutes to an hour.
At the destination the process reverses. If the receiving yard has tight access, the driver may unload on the road edge with an escort managing traffic, so it is worth telling us about any gate width or yard restrictions in advance.
If you drive it yourself
For short moves between fields, driving remains the normal choice. Plan the run for quieter times of day, avoid school-run hours and market days, and check the lights, beacons and side markers work before setting off. Remove the header and put it on its trolley, and keep the unloading auger folded.
A second vehicle travelling ahead with hazard lights is sensible on narrow lanes, so oncoming drivers have warning. Wide machines may need a formal escort. Pull in where safe to let queues pass; a long tail of traffic behind a combine is where most road incidents start. If the route includes a low bridge, a weak culvert or a level crossing, find another way or arrange haulage instead.
Insurance and damage
Check two policies before any move. Your farm machinery policy may or may not cover the combine while it is on someone else's trailer. The haulier's goods-in-transit cover should take over once the machine is loaded, but only up to its stated limit. With a modern combine, ask for written confirmation that the limit exceeds the machine's value, and photograph the machine before loading. If driving it yourself, confirm your own policy covers road use, especially when the operator is a contractor or seasonal worker rather than a named driver.
Questions people also ask
Can I drive a combine harvester on the road?
Yes. Combines are driven on UK roads routinely, as long as the machine meets the lighting, marking and width requirements for agricultural vehicles and the driver holds the right licence category. For long distances or wide machines, haulage on a low loader is usually safer and quicker, and it avoids wear on the machine.
How much notice do you need to move a combine?
Allow at least a week. Wide loads need advance notice to the police and the road and bridge authorities, and the route has to be checked for low bridges and weight limits. In harvest, low loaders are booked well ahead, so earlier is better if your dates are fixed.
Who is responsible for wide-load notifications?
The haulier moving the load gives the notices required under the Special Types rules, plans the route and supplies any attendants or escorts. You should give accurate dimensions for the machine, including the width with the header removed, so the notices match what is actually on the trailer.
Written and checked by the Farm Machinery Transport team. Read our editorial policy.
More guides
How Much Does Farm Machinery Transport Cost in the UK?
Farm machinery transport in the UK costs £180–£350 to move a compact or vintage tractor locally on a beavertail, £350–£750 for a 6–9 tonne tractor…
How to Prepare a Tractor for Transport: A Checklist
To prepare a tractor for transport, remove dual wheels, front weights and loose items, lower and secure the three-point linkage, check it starts and…
Collecting Machinery from a Farm Auction or Dispersal Sale
After buying at a farm auction or dispersal sale, book haulage as soon as the hammer falls, because collection windows are short and lorries fill up…
Low Loader vs Beavertail vs Flatbed for Farm Machinery
A beavertail lorry suits compact tractors, mini diggers and smaller implements up to around 10 tonnes. A semi-low loader or low loader is needed for…
Get a free farm machinery transport quote
Tell us what you need and we'll come back with a clear price.
Request a quote